top

Whether it is the user to buy a gypsum grinding mill from our company or share the knowledge about gypsum mill on our official website, we have always emphasized the maintenance of the gypsum mill. Because this is not only related to the productivity of the gypsum mill, but also affects the service life of the gypsum mill. What I want to introduce to you today is what happens when the gypsum mill is not well lubricated?

In the use of a gypsum mill, if the lubrication work is not done, bite wear will occur. What is bite wear? That is, the parts inside the machine are adhesively worn, and at this time, a large friction phenomenon occurs between the related parts, and it is common that the roller and the engaging piece often occur.

The parts inside the gypsum mill are in smooth contact under normal conditions. Even if there are some irregularities in some places, it will not affect the machine under the action of lubricating oil. However, there is no lubricating oil. In some parts of the rough surface, because the contact surface is small, the force is large and the resistance is large, causing more wear on the surface until the wear occurs. Moreover, the original oxide film on the surface of the part will also be destroyed, and a fresh surface will appear, so that the metal in the active state on the surface will directly interact, resulting in a sticking point. When the gypsum mill continues to move, the sticking point material is made. Migrate from one surface to another.

Lubricating the gypsum mill is a good habit to maintain the mill. In the long run, this method not only enhances the productivity of the gypsum mill, but also increases the service life of the gypsum mill. Therefore, when using the gypsum mill, the user must do the maintenance work, don't be lazy!

 

 

1428895392513233.jpg