top
Introduction of Gypsum Powder Processing machine:
MTMseries Gypsum Powder Processing machine is a new kind of micro-powder processing equipment, which is invented through more than twenty times experiments and improvements, and based on twenty years of mill manufacture experience while absorbing advanced international machine manufacture techniques. MTW series of Gypsum Powder Processing machine is mainly used in processing non-inflammable, non-explosive, brittle material with hardness below six mohs, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, pyrophillite, ceyssatite, barite, gypsum, alunite, granite, fluorite, phosphate rock, kalium ore, float stone, more than 200 kinds of materials.

Gypsum Powder Processing Machine Working Principle of Gypsum Powder Processing machine:

The motor drives the main shaft and every turnplate through the reducer. The reducer drives dozens of rollers to rotate against race way of ring through pin. Small materials crushed by hammer crusher is transported into hopper by elevator, and then vibrating feeder shall feed material to the central part of upper turnplate evenly. The material falls to circle under the centrifugal force and comes down to raceway of ring to be crushed into powder. After grinded in the first race way, the material goes to the second and third turnplate. The blower inhales the external air into the mill and carries the powder after third turnplate into powder-separator. Turbine in the separator makes the coarse powder drop down and regrinded and the fine powder shall go into cyclone powder collector together with air current and go down through discharge valve as final product; At the same time, air current with a little dusts goes out through blower and muffler after purified by filter.

Application of Gypsum Powder Processing machine:
MTM Series the equipment specializing in producing fine and superfine powder of non inflammable, non explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.

In the modern industry, usually, the gypsum powder has 100 mesh, 800 mesh, 1250 mesh, and 4,000 mesh. An entire gypsum powder production line is consisted of the following stages, such as the crushing stages, grinding stages, calcining stage, and packing stage, etc. As a professional manufacturer of mining equipment, Clirik can offer all mining machines involved in the production process of gypsum powder. In addition, we can design a whole set of gypsum powder production line according to the particular requirements of customers. If you have an interest in our gypsum powder processing machines or production line, please contact us!