30-425 mesh gypsum powder grinding process By Raymond Mill For Sale
The Clirik Raymond mill is mainly used for grinding the material with middle and low hardness, below 6% moisture, and the material should be non-explosion and non-flammability, such as: calcite, chalk,limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite,iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite,barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassiumore pumice, etc
30-425 mesh gypsum powder grinding process By Raymond Mill Working principle
1)Raw material which has been crushed to the size specified is elevated into a hopper from which the stuff is loaded. And then through the vibrating feeder ,the materials will transferred evenly and continuously into the gypsum powder manufacturing process grinding chamber for powder-processing. After this,the ground stuff is carried by the air from the blower into the classifer for regrinding.The set's airflow system is closely sealed up and circulated under the condition of negative and positive pressure.
2) The gypsum powder manufacturing process is driven by rotation of the central axle through decelerator ,with the up end of the axle connecting to a quincunx-rack upon which the grinding equipment is fixed. The whole set equipment turns together with the axle along the grinding ring while the rollers rotate driven by the fractional force .A set of shovel are installed at the lower end of the quincunx-rack.While turning together with the rollers ,the shovels shed the stuff onto the gap between the rollers and the ring ,and that's where the stuff layer forms .The rotating rollers ,while turning together with the ring ,grind the stuff layer into powder.
3) The turning speed of the impeller can be adjusted to the requirement of the fineness of powder products .
4)gypsum powder manufacturing process plays an important role in ensuring the function of the grinder . As the high-speed revolving air current mixed with ground stuff is flown into the cyclone-collector ,the ground stuff is separated from the air-current

Features of  Gypsum Powder Manufacturing Process by raymond Mill
Low running costs
It adopts the technology that vertical roller grind material directly on the disc, with low energy consumption; for the roller is not contact with the disc directly in the work, and the roller and liner are made by quality materials, it is of less wear and long life.
Simple and reliable operation
Its automatic control system can reach remote control, which is easy to operate; there is the device to prevent roller sleeve contact with disc liner directly, and avoid the destructive impact and severe vibration; we can turn the rotating arm by repairing fuel tank, replace the roller and liner are more convenient, which can reduce the downtime.
Energy conservation and environmental protection
It features small vibration, low noise, and sealing device as a whole, and the system also works with no pressure and dust spills.