top
gypsum micro powder grinding mill application:

1 gypsum micro powder grinding mill is to grind materials in the fields of building material, mining, metallurgy and chemical industry.
2.The materials must be non-flammable and non-explosive materials such as limestone, calcite, barite, dolomite, potassium feldspar, marble, talcum, gypsum, medical stone, rock phosphate, manganese ore, iron ore, glass, ceramics, active carbon, fireproof materials, heat preservation materials, chemical materials and so on.
3.The material hardness should be below 9Moh and the moisture should be below 6%. The fineness of the finished products can be adjusted between 30m and 400m.

The advantages of gypsum micro powder grinding mill     

1.High Efficiency.
Under the same finished final size and the same motor power, the capacity of the machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.

2.Long lifecycle of spare parts.
The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.

3.High safety and reliability.
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

4.High fineness, flexible adjustment.
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.

5.Environment-friendly.

Gypsum micro powder grinding mill main equipments:

1. gypsum micro powder grinding mill consists of jaw crusher, bucket elevator, electric vibrating feeder, main unit, optional equipment, blower, centrally electric control system, etc.
2.To increase the productivity of the complete grinding plant, you can reach it through choosing suitable powder grinding mills.

gypsum micro powder grinding mill process flow:

Firstly Large materials are crushed by jaw crusher to the needed sizes.

Then the materials are elevated to storage hopper by bucket elevator.

Thirdly, the materials are fed into the grinding chamber for grinding by vibrating feeder evenly and continuously.

The powder after grinding goes upwards together with the airflow, after separated by powder separator, the powder which can meet the fineness requirement enters the cyclone powder collector through pipe together with the airflow, and then is discharged from the discharge valve as final products.