PEX Jaw Crusher

Product Introduction

PEX jaw crusher consists of two jaw plates, a movable jaw, and a static jaw, forming a crushing chamber, which simulates the movement of the two jaws of an animal to complete the material crushing operation. It is widely used in stone mining, metallurgy industry, building material, highway, railway, water conservancy, and chemical industries. Various materials with compression resistance less than 320MPa can be crushed.

Jaw Crusher

Product Parameter

Model PEX-150 × 250 PEX-150 × 750 PEX-250 × 750 PEX-250 × 1000 PEX-250 × 1200 PEX-300 × 1300
Opening Size(mm) 250 × 150 750 × 150 750 × 250 1000 × 250 1200 × 250 1300 × 300
Feed Size(mm) 125 125 210 210 210 250
Output Open Range(mm) 10-40 18-18 25-60 25-60 25-60 25-105
Power(KW) 5.5 15 22-30 30-37 37 75
Capacity(t/h) 1-5 5-16 15-30 16-50 20-60 20-90
Size(mm) 875 × 758 × 850 1200 × 1500 × 1200 1667 × 1545 × 1020 1530 × 1992 × 1380 1900 × 2192 × 1430 2720 ​​× 1950 × 1600
Weight(t) 0.81 3.8 5/td> 7 8 11

Working Principle 

The working mode of PEX jaw crusher is mobile and extrusion. The working principle is as follows: The jaw crusher uses the motor as the powder. The eccentric shaft is driven by the wheels of the motor, the V-belt, and the grooved wheel so that the movable jaw plate moves according to the prescribed orbit.

Therefore, the material in the crushing cavity which is composed of the fixed jaw plate, movable jaw plate, and the side backplate, can be crushed and discharged through the discharge port.

When the jaw crusher is working, the movable jaw plate cyclically reciprocates against the fixed jaw plate, sometimes approaching and sometimes leaving.

When approaching, the material is crushed by squeezing, splitting, and impact between the two jaws; when leaving, the crushed material is discharged from the discharge port by gravity.

Product Advantages 

1. Our Jaw Crusher  has relatively simple design and simple component replacement.

2. Our Jaw Crusher  has high capacity and lower power consumption. 

3. Our Jaw Crusher  are easy operation and low investment. 

Our Company 

SHANGHAI CLIRIK MACHINERY CO., LTD located in Pudong New District of SHANGHAI, CHINA as a pioneer enterprise, which is specializing in research, manufacture and sales of all kinds of mining equipment. Our company has already formed a full set of modern production line, equipped with intelligent, standardized testing and controlling laboratories, owned a professional team for R&D, production, sales and service.

ALL RIGHTS RESERVED CLIRIK Copyright © 2022 Clirik All Rights Reserved